Cosun 12.8V 170Ah LFP battery Module
IFM12-1700E1 Battery Pack Features Interchange design of lead acid battery Built-in PCB for over-voltage, under voltage and over-temperature Series connection up to four batteries (48V) Module BMS with Active DC-DC 1.5A high efficient cell balancing Maintenance-free Rugged mechanical design Thousands of cycles under normal conditions Can be charged with most lead-acid chargers IFM12-1700E1 Battery Pack Parameters Item IFM12-1700E1 Nominal Voltage 12.8V Nominal C...
Advance Active Balance BMS
Remote Control Battery Cloud
IFM12-1700E1 Battery Pack Features
Interchange design of lead acid battery
Built-in PCB for over-voltage, under voltage and over-temperature
Series connection up to four batteries (48V)
Module BMS with Active DC-DC 1.5A high efficient cell balancing
Rugged mechanical design
Thousands of cycles under normal conditions
Can be charged with most lead-acid chargers
IFM12-1700E1 Battery Pack Parameters
|Dimensions Including Terminals (L*W*H)||347.5 x 155.5 x 270mm|
|Max. Constant Current||80A|
|Max. Pulse Current (30S)||120A|
|Cut-off Voltage||9.6V (recommended 10V)|
|Float Charge Voltage||13.8V|
|Max. Constant Current||50A|
|DC Internal Resistance (Approx.)||6mΩ|
|Water/Dust Resistance (IP Rating)||IP56|
|Safety Certification||IEC62169,CE/TUV UN38.3|
Cosun Active Balance BMS is purposely developed by Cosun and our German PV
installer partner for LiFePo4 battery, by adopting an innovative module design which
consists of active balance module, main control module and switch output module,
a custom BMS can be easily made for 4~64 string of lithium iron phosphate battery.
Module Design * Intelligent * Cost Effective
Flexible for 4-64 String Inverter auto-matching 3-4 times less than competition
1.5A Balancing Current
Ultralow Operating & Quiescent Current: 100mA / 9uA
More Run-time,More Usable Capacity and More Cycle, Longer Life time
Cosun Battery Cloud
Remote Control of Cosun Battery System
1. Monitoring / History Data Record
Knows your battery info anything,anywhere
2. Diagnostic Function
Your battery doctor is always online to
watch the health of your battery,don’t
wait for the problem but fix it before error.
3. Firmware Updating online/remotely
Reduce installer/service engineer site visits
to the minimum，save time and money.
4. Data Transfer Unit (DTU)
Easy and simple to have the battery cloud
system work, just add the DTU, connet it to Internet.
With its seemingly limitless programmable functions, the XTM offers unequalled flexibility compared to other products on the market.
The inverter/charger has a continuous power rating of 3.5kVA up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 4kVA, and can deliver 10.5kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.